CORNING EDGE Splice Cassette Посібник
Переглянути онлайн або завантажити pdf Посібник для Кабелі та роз'єми CORNING EDGE Splice Cassette. CORNING EDGE Splice Cassette 7 сторінок.
Друкувати сторінку
related literature |
003-794
004-048
001-059
LAN-307-EN
LAN-1550-AEN
1.
Carton Contents
a. EDgE Splice Cassette containing:
•
(12) 40 mm splice protectors (for single-fiber
installation)
•
(1) 40 mm splice protector (for ribbon
installation)
b. EDgE Field-Terminated Cassette
2.
Tools and Materials
•
Hook blade
•
Measuring tape
•
Scissors
•
4-in cable ties
•
900 µm tubing
•
Electrical tape
3.
Preparing the Cable
CAUTION: The wearing of cut-resistant safety gloves to protect your hands from accidental injury
when using sharp-bladed tools and armored cable is strongly recommended. Use extreme care
when working with severed armor. There will be a sharp edge where armor is cut. To minimize
the chance of injury from the cut armor, cover the exposed edge with a wrap of electrical tape. To
minimize the chance of injury from sharp-bladed tools, always cut away from yourself and others.
Dispose of used blades and armor scrap properly.
CAUTION: Recommend the use of safety glasses (spectacles) conforming to ANSI Z87, for eye
protection from accidental injury when handling chemicals, cables, or working with fiber. Pieces of
glass fiber are very sharp and have the potential to damage the eye.
CAUTION: Fiber optic cable is sensitive to excessive pulling, bending, and crushing forces.
Consult the cable specification sheet for the cable you are installing. Do not bend the cable more
sharply than the minimum recommended bend radius. Do not apply more pulling force to the
cable than specified. Do not crush the cable or allow it to kink. Doing so may cause damage that
can alter the transmission characteristics of the cable; the cable may have to be replaced.
STANDARD RECOMMENDED PROCEDURE 000-274 | ISSUE 4 | AUgUST 2016 | PAgE 1 OF 7
Instruction, EDgE™ Solution
Instruction, Accessing Individual Fibers in Ribbon Fiber Optic Cables with the
TKT-050 Kit
Instruction, Fiber Organizer Tape Applicator (FOTA) Operator Manual
Specification Sheet, Fiber Optic Splicing Tool Kits
Visual Installation Instruction, 250 µm Fiber
OR
EDgE™ Splice Cassette/
EDgE™ Field-Terminated
Cassette
000-274, Issue 4
TPA-4067
For Ribbon Installation:
•
1/4-in braided tubing
(p/n 06-710-27)(optional)
•
Friction tape
For Single-fiber Installation
•
Miller
three-hole stripping tool
®
•
Ring cutting tool (p/n 3204002-01)