CORNING ONE MxU Інструкція по швидкому встановленню

Переглянути онлайн або завантажити pdf Інструкція по швидкому встановленню для Вимірювальні прилади CORNING ONE MxU. CORNING ONE MxU 8 сторінок. Mid-power expansion unit

Друкувати сторінку

1. THE MxU supports the 2.5 GHz TDD band and is installed in conjunction with the mid-power remote unit (MRU) (ordered

and installed separately), expanding the number of supported services to eight.

2. The MxU is installed at the remote site and interfaces the MRU.

3. Depending on the model (including AC or DC power supply module), the unit requires a 100-240 VAC or

48 VDC (30-60 VDC).

4. The MxU is intended for connection to a TN power system and IT power system of Norway only.

5. Unit is provided with two mounting options:

• 19-in rack – preassembled rack ears

• Wall-mountable – mounted onto MRU mounted on a wall (wall-mountable brackets ordered separately)

This document describes the installation and connection procedures for the Corning® optical network evolution (ONE™) solutions

mid-power expansion unit add-on (MxU).

PACKAGE ITEMS

The items listed in Table 1 are included in the MxU package. If any of the listed items are missing, contact your Corning

representative.

Item Description

Mid-Power Expansion Unit:

MRU-ASM-AO-AC

MRU-ASM-AO-DC

Rack-Mountable Brackets (factory assembled)

QMA/QMA RF Cables — used for UL/DL RF connections

RJ45 100 Base-T Ethernet Cable (P/N: 705A055702) – used for management port connection

4.3-10 DIN RF Jumper Cable (P/N: 705A055602) – used for antenna port connection

AC Power Cable (for MxU AC models only) – straight, U.S 10 A ,UL, L = 1.8-2.5 m, black, 110 V (P/N: 705900007)

Table 1. Package Items List

Corning Optical Communications

Mid-Power Expansion Unit

(MxU) Quick Installation Sheet

CMA-597-AEN

GENERAL INFORMATION

Quantity

Quick Installation Sheet | CMA-597-AEN | Page 1