Makita 4351FCT Технічна інформація - Сторінка 12

Переглянути онлайн або завантажити pdf Технічна інформація для Електроінструмент Makita 4351FCT. Makita 4351FCT 15 сторінок. Jig saw
Також для Makita 4351FCT: Технічні характеристики (2 сторінок), Розбивка на частини (3 сторінок), Інструкція з експлуатації (13 сторінок), Інструкція з експлуатації (13 сторінок), Інструкція з експлуатації (9 сторінок)

Друкувати сторінку

epair

[14] Disassembling Motor section

1. Remove Rear cover from Motor housing by unscrewing 4x18 Tapping screw.

2. Disconnect the connector of LED circuit. the electric parts module can be pulled out from Motor housing. (Fig. 43)

Fig. 43

Motor housing

3. With referring to [4] Removing Head cover in pages 3 and 4, remove Head covers and Gear housing cover.

4. Remove carbon brushes.

5. After removing Retaining ring S-8 from the shaft of Gear housing, separate the Crank section from Gear housing

by striking Gear housing. Disassembling the Crank section is not required for removal of Motor section. (Fig. 44)

6. After removing 4x30 Tapping screws, remove Gear housing from Motor housing by striking Gear housing.

Armature can be removed together with Gear housing as illustrated in Fig. 45.

7. Move Switch rod with 1R291 in the direction illustrated by arrow and remove Switch lever from Motor housing.

(Fig. 46)

Fig. 44

Crank section

Retaining ring S-8

Fig. 46

Switch lever

Switch rod

[15] Assembling Motor section

1. Insert Switch rod into Motor housing to align their wide square holes. Figs. 47 and 47A.

2. While pressing Switch rod to the wall of Motor housing, insert Switch lever into the aligned wide square holes.

3. Push Switch rod in direction to Gear housing side on condition that Switch lever is in OFF position. Switch lever and

Switch rod can be interlocked.

4. Connect the connector of LED circuit.

Fig. 45

Motor housing

Switch lever

Connector of LED circuit

Shaft of

Gear housing

1R291

Electric parts module

Fig. 45

Tapping

screws

4x30

Motor housing

Wide square hole of

motor housing

Switch lever

P 12 / 15

Rear cover

4x18 Tapping screw

Gear housing

Armature

Wide square hole of switch rod

Switch rod

Motor housing