Makita 5090DW Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 5090DW. Makita 5090DW 17 сторінок. 85mm with fast charger
Також для Makita 5090DW: Перелік деталей (1 сторінок)

Друкувати сторінку

SAW BLADE

CAUTION: Always be sure that the tool is switched

off

and the battery cartridge

removed before installing or removing the blade.

Use only the Makita hex wrench to remove and install the blade.

Removing Saw Blade

remove the blade:

1. Press the blade stopper pin and

insert it through the hole in the

blade so that the blade cannot

revolve.

2. Use the hex wrench to loosen the

bolt.

3. Remove the bolt, flange, and

blade.

Installing Saw Blade

To install the blade:

1. Place the blade over the spindle,

With teeth pointina up a t the front

of the tool.

2. Place the flange over the blade.

3. Insert bolt into blade and flange.

4. Press the blade stopper pin and

insert it through the hole in the

blade so that the blade cannot

revolve.

Use the hex wrench to tighten the bolt, flange, and blade in place.

BE SURE TO TIGHTEN THE BOLT SECURELY.

Hex Wrench Storage

When not in use, the hex wrench can

be conveniently stored.