Makita 5620D Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 5620D. Makita 5620D 12 сторінок.

1. Lock-off button

2. Switch trigger

ASSEMBLY

1. Shaft lock

2. Hex wrench

1. Saw blade

2. Hex bolt

3. Outer flange

4. Inner flange

Switch action

001407

CAUTION:

•

Before inserting the battery cartridge into the tool, always check to see

that the switch trigger actuates properly and returns to the "OFF" position

when released.

To prevent the switch trigger from being accidentally pulled, a lock-off button is

provided. To start the tool, push in the lock-off button and pull the switch trig-

ger. Release the switch trigger to stop.

CAUTION:

•

Always be sure that the tool is switched off and the battery cartridge is

removed before carrying out any work on the tool.

Removing or installing saw blade

001428

CAUTION:

•

Be sure the blade is installed with teeth pointing up at the front of the

tool.

•

Use only the Makita wrench to install or remove the blade.

To remove the blade, press the shaft lock so that the blade cannot revolve and

use the wrench to loosen the hex bolt clockwise. Then remove the hex bolt,

outer flange and blade.

To install the blade, follow the removal procedure in reverse. BE SURE TO

001445

TIGHTEN THE HEX BOLT COUNTERCLOCKWISE SECURELY.

When changing blade, make sure to also clean upper and lower blade guards

of accumulated sawdust. Such efforts do not, however, replace the need to

check lower guard operation before each use.