Bernina NON-STICK ZIGZAG FOOT 52 Короткий довідковий посібник - Сторінка 8
Переглянути онлайн або завантажити pdf Короткий довідковий посібник для Аксесуари Bernina NON-STICK ZIGZAG FOOT 52. Bernina NON-STICK ZIGZAG FOOT 52 8 сторінок. Presser feet, attachments, and accessories
Друкувати сторінку
At-A-Glance Reference Guide
to BERNINA
Coded Feet
The current sensor of the coded feet enables the foot to
sense the stitch width—5mm or 9mm. Coded feet will be
manufactured with a new sensor that detects the stitch
width and is also part of the new presser foot recognition
System of the 8-Series machines.
Other points to know:
• All existing classic feet, the C-feet and all feet without sensor, can be used with the BERNINA 820 & 830.
• The 9mm detection is the same with "old" C-feet and with new C-feet.
• A foot without a sensor will be detected as a 5.5mm foot. This means straight stitch feet will not be
detected automatically but each mounted foot can be selected from the list of the touch screen.
Page 8 of 8
®
Presser Feet, Attachments, and Accessories
Duplicates the look of hand needle felting but is
much faster. Works only with BERNINA models
that have CB Hook systems. Has five barbed
needles and comes with a special stitch plate
to accommodate them.
Video clips showing basic uses of each BERNINA
presser foot and accessory are available at:
www.berninausa.com
Go to: products > accessories > presser feet
NEEDLE PUNCH ACCESSORY SET
"old" sensor
For complete information on using all of the
®
BERNINA
presser feet and accessories, see
Feet-ures, a 3-volume set of spiral-bound
books. This comprehensive guide includes
technique and setting specifics plus a useful
cross-check feature referencing all BERNINA
presser feet that can be used for particular
techniques.
"new" sensor
®
©2009 BERNINA of America, Inc.