Makita 6905B Інструкція з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 6905B. Makita 6905B 13 сторінок. 12.7 mm (1/2")
Також для Makita 6905B: Розбивка на частини (2 сторінок), Інструкція з експлуатації (8 сторінок), Інструкція з експлуатації (20 сторінок), Інструкція з експлуатації (7 сторінок), Інструкція з експлуатації (11 сторінок), Інструкція з експлуатації (8 сторінок)

MAINTENANCE

1. Limit mark

1. Screwdriver

2. Brush holder cap

ACCESSORIES

4. The use of the universal joint or the extension bar some-

what reduces the fastening force of the impact wrench.

Compensate by fastening for a longer period of time.

5. The manner of holding the tool or the material of driving

position to be fastened will affect the torque.

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

001145

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

002372

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

CAUTION:

•

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding these

accessories, ask your local Makita service center.

•

Extension bar

•

Universal joint