Makita 6912D Технічна інформація - Сторінка 3
Переглянути онлайн або завантажити pdf Технічна інформація для Електроінструмент Makita 6912D. Makita 6912D 5 сторінок. 12mm cordless ratchet wrench
Також для Makita 6912D: Інструкція з експлуатації (12 сторінок)
Друкувати сторінку
(7)
(8)
(9)
(10)
(11)
(7)Torsion spring
(12)Ratchet pawl
(17)Flat washer
(22)Spur gear 16
(27)Compression spring 6
(2) The parts from7 to 14 can be easily dismounted after the sub-housing R and L are taken off. Remove the housing
R and then remove the parts from 15 to 29 out of the housing L. (Care must be taken not to misplace 27 the
compression spring 6 in removing the parts.) (See fig.2.)
(3) 18 the spindle, 19 steel ball 3.5 20 compression spring 2.4 and 21 complete clutch cam assembly are the clutch
related parts. Other parts can be manually dismounted. (See the fig.2.)
(4) Remove 21 the complete clutch cam assembly from 18 the spindle.(Be careful not to scatter19 steel balls around
in removing the 21 complete clutch cam assembly as the 19 steel balls 3.5 are pressed against the 21 complete
clutch cam assembly with the 21 compression spring 2.4.) See the fig. 2.
(5) Replace the 20 Compression spring 2.4 and 21 complete clutch cam assembly together in replacing the clutch
(12)
(14)
(15)
(16)
(8)Spring type catch
(13)Torsion spring 7
(18)Spindle
(23)Internal spur gear 49
(28)Switch lever
(13)
(19)
(17)
(18)
(27)
(25)
(28)
(9)Ratchet holder
(14)Sleeve 4
(19)Steel ball 3.5
(24)Flat washer
(29)Battery holder
(20)
(22)
(23)
(21)
Fig.2
(10)Socket 21
(15)Collar
(20)Compression spring 24 (21)Complete clutch cam
(25)DC motor
(24)
(26)
(29)
(11)Pin 4
(16)Needle bearing 1015
(26)Switch