Makita 6953 Інструкція з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 6953. Makita 6953 17 сторінок.
Друкувати сторінкуDo not expose power tools to rain or wet
conditions. Water entering a power
tool
will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace
damaged cords immediately. Damaged
cords increase the risk of electric shock.
When operating a power tool outside, use
an outdoor extension cord marked "W-A"
or "W". These cords are rated for outdoor
use and reduce the risk of electric shock.
Tool Use and
Care
15.
Use clamps or other practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body is unstable and may lead
to
loss of control.
16. Do
not force tool. Use the correct tool for
your application. The correct
tool
will do the
job better and safer at the rate for which it is
designed.
17.
Do not use tool if switch does not turn it
on or
off.
Any
tool
that cannot be controlled
with the switch is danaerous and must be
u
Personal Safety
repaired.
9. Stay alert, watch what you are doing and
18.
Disconnect the plug from the power
use common sense when operating a
source before making any adjustments,
power tool. Do not use tool while tired or
changing accessories, or storing the tool.
under the influence of drugs, alcohol, or
Such preventive safety measures reduce the
medication. A moment of inattention while
risk of starting the
tool
accidentally.
operating power
tools
may result in serious
personal injury.
19.
Store idle tools out of reach of children
and other untrained persons. Tools are
10.
Dress properly. Do not wear loose cloth-
dangerous in the hands of untrained users
ing
Or
jewelry.
Contain
long
hair'
Keep
20.
Maintain tools with care. Keep cutting
your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
11.
Avoid accidental starting. Be sure switch
your finger on the switch or plugging in
tools
that have the switch on invites accidents.
tools sharp and clean. Properly maintained
tools
with sharp cutting edges are less likely
to
bind and are easier
to
control.
2,. Check for misalignment
or binding of
other condition that may affect the tools
oDeration. If damased, have the tool ser-
is off before plugging
in.
Carrying
took with
moving
parts, breakage
of
parts, and
any
-
.
12.
Remove adjusting keys or wrenches
viced before using. Many accidents are
before turning the tool on. A wrench or a
caused by poorly maintained
tools.
key that is leftattached
to
a rotating part of
the tool may result in personal injury.
22, Use only accessories that
are recom-
mended by the manufacturer for your
13.
Do not overreach. Keep proper footing
and balance at all times. Proper footing and
balance enables better control of the
tool
in
unexpected situations.
14.
Use safety equipment. Always wear eye
protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must
be used for appropriate conditions. Ordinary
eye or sun glasses are NOT eye protection.
model. Accessories that may be suitable for
one
tool,
may become hazardous when used
on another tool.
SERVICE
23. Tool
service must be performed only by
qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
3