Makita 903DW Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 903DW. Makita 903DW 17 сторінок. Cordless blade sharpener
Друкувати сторінку
This will allow approx. 1/5 of the wheel
point diameter to protrude above the
chain cutters
as
chain manufacturers re-
commend.
NOTE :
Always check the protrusion of the wheel point using the gauge after tightening the
wing bolt securely because the guide may move when you tighten the wing bolt secure-
ly.
1/5
of
wheel point diameter
%
Place the wheel point on the chain so
that the wheel point fits into the chain
cutter and the guide line
(30"
or
35")
on the guide is parallel to the chain.
Switch on the tool and wait until the
wheel point attains full speed. Then
move the tool back and forth several
times while maintaining the wheel point
level or a t 10" in relation to the chain.
(Refer to the instruction manual of your
chain saw whether you should maintain
the wheel point level or maintain it
a t
IO".)
1
Chain
Level
___)
1
oo
CAUTION :
Place the wheel point on the chain before switching on and remove the wheel point
from the chain after the wheel point has come to
a
complete stop. Otherwise the rotat-
ing wheel point may damage the chain cutters.
10