Makita 9911 Інструкція з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita 9911. Makita 9911 17 сторінок. 76mm
Також для Makita 9911: Розбивка на частини (3 сторінок), Інструкція з експлуатації (13 сторінок), Інструкція з експлуатації (8 сторінок), Інструкція з експлуатації (8 сторінок), Технічна інформація (5 сторінок), Інструкція з експлуатації (17 сторінок)
Друкувати сторінку
FUNCTIONAL
DESCRIPTION
2
1. Lock button
2. Switch trigger
1
1. Speed adjusting dial
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
003366
1
CAUTION:
•
Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
•
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To start the tool, simply pull the switch trigger. Release the
switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
Speed adjusting dial
For 9911 only
003369
The belt speed can be infinitely adjusted between 75 m (250
ft.) and 270 m (900 ft.) per minute by turning the speed
adjusting dial to a given number setting from 1 to 6. Higher
speed is obtained when the dial is turned in the direction of
number 6; lower speed is obtained when it is turned in the
direction of number 1.
Select the proper speed for the workpiece to be sanded.
CAUTION:
•
If the tool is operated continuously at low speeds for a
long time, the motor will get overloaded, resulting in tool
malfunction.
•
The speed adjusting dial can be turned only as far as 6
and back to 1. Do not force it past 6 or 1, or the speed
adjusting function may no longer work.
7