Avantgarde ARM1100W Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Холодильник Avantgarde ARM1100W. Avantgarde ARM1100W 17 сторінок.

4.CARE AND MAINTENANCE

WHEN THE FRIDGE IS NOT IN USE FOR A PROLONGED PERIOD:

Remove the power plug from the power point.

•

Remove all contents from the fridge.

•

Dry the interior and leave the door open for a few days.

•

WHEN YOU WISH TO MOVE THE FRIDGE:

Secure all movable parts and contents. (Package them separately if necessary.)

•

Transport the fridge only in an upright position. In any other position you may damage the compressor.

•

DEFROSTING

The refrigerator features an automatic cycle defrosting system. The refrigerator has a cold plate located behind the back wall of the

cabinet. Ice builds-up on the back wall while compressor operation is normal. When the compressor has cycled off, accumulated ice

will automatically defrost. The defrost water will pass through the drain outlet located at the bottom of the cabinet and funnel into a

pan situated above the compressor. With the heat of the compressor, the water will gradually evaporate.

Reminder; keep the drain opening clear of residues. If the outlet is not kept clean it may result in an overflowing causing the

water to accumulate at the bottom of the refrigerator, and eventually leaking on the floor.

HOW TO CLEAN

Cleaners: Never use harsh, abrasive cleaners, heavy-duty cleaners, or solvents on any surface.

Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic waxing, use silicon wax.

Refrigeration Section:

soda solution (3 tablespoons to I liter of water) or warm sudsy water, rinse and dry.

Magnetic Door Seals:

The Finishing Touch:

TIPS FOR ENERGY SAVINGS

Keep the refrigerator doors closed as much as possible, particularly in warm / humid conditions.

Maintain adequate ventilation around the back and sides of the unit.

Maintain a thermostat setting of between "3" and "5" under normal use.

Allow warm food to cool to room temperature before placing in the refrigerator.

Wash shelves and other removable parts in warm sudsy water, rinse and dry. Wash interior with baking

Wash with warm sudsy water.

Replace all parts and return thermostat dial to desired setting.