Makita AN621 Інструкція з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita AN621. Makita AN621 19 сторінок. Makita an621 coil nailer: specifications
Також для Makita AN621: Розбивка на частини (3 сторінок)
Друкувати сторінку
Selecting wirelplastic collated coil
According to the type of collated coil, set the change
lever.
lever
Wire
-
collated
111
Loading nailer
CAUTION:
*Always lock the trigger and disconnect the hose before loading the nailer.
Make sure that nails are collated firmly and are not bent.
Select nails suitable for your work. Pull the lever of
the magazine cap and open the magazine cap.
Lift and turn the coil support plate to set it to the gradu-
ations
of
the magazine. If the tool is operated with the
coil support plate set to the wrong step, poor nail feed
or malfunction of the tool may result.
Place the nail coil over the coil support plate. Uncoil
enough nails to reach the feed claw. Place the first
nail in the driver channel and the second nail in the
feed claw. The nail heads must be in the slot in the
feeder body. Place other uncoiled nails on feeder body
and attach them to the magnet. Be sure that nails are
in the feeder claw and are not bent. Then close the
magazine cap.
I
.
Plastic
collated
coil
L
Magazine cap
Lever
coil support plate
Magnet
-/
Feeder body
12