Makita AN621 Інструкція з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita AN621. Makita AN621 19 сторінок. Makita an621 coil nailer: specifications
Також для Makita AN621: Розбивка на частини (3 сторінок)

Друкувати сторінку

*Never use the tool with other than com-

pressed air. If bottled gas (carbon dioxide,

oxgen, nitrogen, hydrogen, air, etc.) or com-

bustible gas (hydrogen, propane, acety-

lene, etc.) is used as a power source for this

tool, the tool will explode and cause serious

injury.

Always check the tool for its overall condi-

tion and loose screws before operation.

Tighten as required.

Make sure all safety systems are in working

order before operation. The tool must not

operate if only the trigger is pulled or if only

the contact element is pressed against the

wood.

must work only when both actions

are performed. Test for possible faulty oper-

ation with nails unloaded.

COMPRESSED

AIR