James WEDGE Series Посібник з монтажу
Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери James WEDGE Series. James WEDGE Series 2 сторінки.
Друкувати сторінкуTake the bracket off of the back of the speaker
1
by using your hand, and pulling one side of the
bracket out.
3
If the wires are in the wall, then run it through
the bottom slots on the bracket (top photo).
If the wire is in the ceiling, then run the wire
through the top slots of the bracket (bottom
photo).
The bracket can also be secured to a wall
5
using just six wall screws.
WEDGE SERIES INSTALLATION GUIDE
®
INSTALLATION GUIDE
Installation guide for James Wedge Series Speaker
Next, determine if your wires are located in the
2
ceiling or the wall.
4
If the speaker is being installed flush with the wall
and ceiling, then install all nine screws to secure
the bracket.
Now connect your wires to the speaker. (Red to
6
red, and black to black)