E-Service Payter Посібник з монтажу - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з монтажу для Зчитувач карток E-Service Payter. E-Service Payter 9 сторінок. Wireless card reader
Друкувати сторінку
Payter Pulse Cable Connections to
Payter Interface Board
INHIBIT switch to be set to High – As shown on image below
Mechanical Meters supplied are not polarity sensitive and can be connected either way but must
Payter Installation Guide
be connected to pins 9 and 10
Pin 1
+12v
Pin 2
+12v
Pin 3
+12v
AC/DC+ (RED)
Pin 4
Payter Pulse In (Sits High Pulses Low)
PULSE (YELLOW)
Pin 5
Inhibit
INHIBIT (GREEN)
Pin 6
0v
Pin 7
0v
GND (BLACK)
Pin 8
0v
GND (WHITE)
Pin 9
0v
METER (marked by O)
Pin 10
Electromechanical Meter Pulse +ive
METER (marked by O)
Pin 11
Logic Meter +ive
Pin 12
Logic Meter -Ive
9