Makita BFL122F Інструкція з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Makita BFL122F. Makita BFL122F 12 сторінок. Cordless angle screwdriver
Також для Makita BFL122F: Інструкція з експлуатації (16 сторінок)
Друкувати сторінку
ENGLISH (Original instructions)
SPECIFICATIONS
Fastening torque
Angle drive head
No load speed (min
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Model
Hard joint
Soft joint
-1
)
Dimensions
Net weight
Rated voltage
) : 70 dB(A) or less
pA
BFL061F
1.5 - 6 N•m
1.5 - 6 N•m
470
422 x 74 x 98 mm (with Battery Cartridge BL1430)
405 x 74 x 98 mm (with Battery Cartridge BL1415)
END004-4
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENE033-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENG905-1
is running idle in addition to the trigger time).
2
BFL082F
BFL122F
2 - 8 N•m
5 - 12 N•m
2 - 8 N•m
5 - 12 N•m
9.5 mm square or 6.35 mm hex
700
410
1.7 kg (with Battery Cartridge BL1430)
1.5 kg (with Battery Cartridge BL1415)
D.C. 14.4 V
BL1430 / BL1430A / BL1415
) : 2.5 m/s
h
2
BFL202F
8 - 20 N•m
8 - 20 N•m
220
ENG900-1
2
or less
ENG901-1