Fringer EF-NZ Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Fringer EF-NZ. Fringer EF-NZ 6 сторінок. Canon ef to nikon z mount adapter
Також для Fringer EF-NZ: Посібник із швидкого старту (4 сторінок)

Друкувати сторінку

4. Firmware update

You need a PC or MAC and a Micro B USB cable, i.e. some

Android phones' data cable (not type C), to upgrade the

adapter.

1) Download new firmware from Fringer's website.

2) Get the adapter off the camera. Make sure not to connect

the adapter with the computer while it is installed on a

camera body.

3) Plug the USB cable to the Micro USB port shown in Figure 1.

4) Connect the other end of the cable to a USB port of your PC or MAC. Then a mobile

drive named 'FRINGER' emerges. Open 'VERSION.TXT' on that drive and check the

current firmware version (the line begins with 'Version:').

5) If upgrading is needed, copy the downloaded firmware file, e.g. EFNZ_100.BIN, to the

drive named 'FRINGER'. Then eject the drive. Ejection is mandatory for MAC and

optional for PC. Ignore any error messages about the drive. Wait for about 20 seconds.

The adapter would disconnect itself and reconnect. The 'FRINGER' drive would

appear again. If it doesn't reconnect automatically, disconnect the USB cable and

reconnect it with the computer.

6) Check VERSION.TXT again and make sure its firmware version has changed to the new

one. You may also check the adapter's version through the camera menu item

"Firmware version". The number after "MA" is the adapter firmware version.

Note: Do not copy files other than the official firmware to the adapter.

Troubleshooting:

Some of the cables in the market are for charging only and not suitable for data

transfer. Thus, if you can't find the "FRINGER" drive when the adapter is connected to

the computer, check your cable!