Avanti RM2411B Інструкція з експлуатації - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Холодильник Avanti RM2411B. Avanti RM2411B 20 сторінок. Avanti products refrigerator
Temperature Control
Your appliance has only one control for regulating the temperature in the fresh food and the
freezer compartment. The temperature control is located on the upper right hand side of the
fresh food section.
The range of the temperature control is from position"1" the warmest to "6" the coldest.
The first time you turn the unit on set the temperature control to "6" or the max-position.
After 24 to 48 hours, adjust the temperature control to the setting that best suites your needs.
The setting of "4" should be correct for home or office appliance use.
Changes of the ambient temperature affect temperature in the interior of the appliance
(choose correct setting of the thermostat knob).
To turn the thermostat off, turn the temperature control to "0".
NOTE:
Turning the temperature control to "0" position stops the cooling cycle but does not shut
off the power to the appliance.
If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the appliance will not
start.
Cleaning Your Appliance
Turn the temperature control to "0", unplug the appliance, and remove the food, shelves, and
trays.
Wash the inside with warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
Wash the shelves and trays with a mild detergent solution. Plastic parts cannot be washed in
a dishwasher.
The outside of the appliance should be cleaned with mild detergent and warm water.
The condenser coils should be vacuumed when they are dusty or dirty.
Clean the drain pan on the refrigerator compressor. Do not remove the drain pan.
After cleaning, connect the appliance to power supply and reload the packages.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of
your appliance if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your food.
Vacation Time
During long absences, remove all the food; unplug your appliance, clean your appliance, and
leave the door slightly open to avoid possible formation of condensation, mold, or odors.
Moving Your Appliance
Remove all the food.
Securely tape down all loose items inside your appliance.
Turn the leveling screws up to the base to avoid damage.
Tape the doors shut.
Be sure the appliance stays in the upright position during transportation.
OPERATING YOUR APPLIANCE
CARE AND MAINTENANCE
10