ALIBI ALI-NVR3108 Посібник з швидкого налаштування - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Мережеве обладнання ALIBI ALI-NVR3108. ALIBI ALI-NVR3108 12 сторінок.

In the screen shown below, enter a new admin password in the New Password field. A valid password must contain

8 - 16 characters and including characters from at least two of the following groups: numbers, lowercase (a .. z), uppercase

(A .. Z), special characters. A strength rating of your new password will appear on the graph on the right.

Enter the same password in the Confirm field, and then click OK to continue.

In the next window, click OK to use the Wizard to perform the initial configuration of your recorder.

In the next screen, set the time zone and date format (using the drop down menus), and the date and clock in your recorder (using the

pop-up graphical menus, see below)). Since video data and capture files are times tamped by the recorder, It is very important that

this information be set precisely to produce valuable evidence from your recorder.

www.Observint.com

After configuring the date and time, click Next to start the clock at the time entered.

In the Network setup Wizard window, click the field value you want to change, then use the pop-up aid to enter a new value. By

default, the NVR uses DHCP (Dynamic Host Configuration Processor) to acquire compatible (dynamic, changeable) network settings

from a network DHCP server. Generally, it is preferable to setup the NVR with a fixed network settings to assure the NVR has an

unchanging IP address, which is convenient for remote login.

To enable fixed network settings, first, un-check the Enable DHCP box. If a DHCP server is active on your network, the IPv4

Address, IPv4 Subnet Mask, IPv4 Default Gateway fields will be populated with network settings assigned by the server. These

settings are compatible with your network. If the fields are not populated, they will be blank as shown above.

Enter (or modify, if necessary) the IPv4 Address, IPv4 Subnet Mask, IPv4 Default Gateway fields to settings compatible with

your network using the virtual keyboard. You can also enter a Preferred DNS Server address (optional, ex. 8.8.8.8 {Google]).

Consult with your network administrator to determine the best network settings for your NVR.

Click Next after you configured the network parameters to open the a window for configuring the network ports you prefer to use.

You can also configure your recorder for DNS (Domain Name Server) access at this time. For more information about these settings,

please refer to the ALIBI Embedded Network Video Recorder Firmware V3.3.4 User Manual available for download from your

vendor. If unsure about how to setup ports and DNS access, click Next to continue.