Garde 181COM2KNIFE Очищення Обслуговування - Сторінка 2

Переглянути онлайн або завантажити pdf Очищення Обслуговування для Кухонна техніка Garde 181COM2KNIFE. Garde 181COM2KNIFE 3 сторінки.

The can opener's surface and knife should be cleaned regularly using a food safe sanitizer.

Recommendation: Noble Chemical's QuikSan Sanitizer and Disinfectant (147QUIKSAN)

Use a toothbrush-style brush to ensure you are able to reach the crevices around the knife.

Recommendation: Scrubble Products 7¼" Utility Brush with Stainless Steel Bristles (27140675)

After cleaning, apply a food safe oil to the gear to keep it turning smoothly.

Recommendation: Petrol-Gel Food Grade Sanitary Lubricant - 4 oz. Tube (401PETROGEL)

Replacing The Knife

(181COM2KNIFE)

1. Using either a Phillips or flat head

screw driver, remove the 2 screws

that connect the knife to the

opener.

2. Remove and discard the old

knife.

3. Position the new knife in line

with the holes. Use the

screwdriver to tighten the screws.

It is recommended the knife and gear are replaced at the same time for optimal performance

Replacement parts can be purchased from the same location

Steel Base

181COBASE2

Cleaning/Maintenance

1. Insert the can opener into the base. The base will be needed

for leverage while removing the gear.

2. Use a flat head screw driver to hold the gear in place by

jamming the head of the screw driver into the teeth of the

old gear. You will need to apply enough pressure to hold the

gear in place.

3. With the screw driver in place, begin turning the handle

counter clockwise. You should feel the tension in the spring

ease up and the gear will come loose after a few turns.

4. Remove the old gear. Insert the new gear. Turn the handle

clockwise until the handle connects to the shaft below the

gear. The spring should be tense now and the can opener

ready to use.

Replacement Parts

the can opener was purchased.

Knife

181COM2KNIFE

Knife Screws

181COM2SCRW

Replacing The Gear

(181COM2GEAR)

181COM2GEAR

Gear