Makita BTD136 Технічна інформація - Сторінка 8

Переглянути онлайн або завантажити pdf Технічна інформація для Електроінструмент Makita BTD136. Makita BTD136 13 сторінок.

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-5 Bit Holder Section and Anvil

DISASSEMBLING

(1) Remove Bumper and Hammer case cover from the machine. (Fig. 2)

(2) Separate Housing (R) from Housing (L), then remove Hammer case section from Motor section. (Fig. 3)

(3) Remove Bearing box complete from Hammer case complete. (Fig. 4)

(4) Separate Hammer case complete. (Fig. 5)

(5) Bit holder section and Anvil can now be disassembled (Figs. 19, 20 and 21)

Fig. 19

Use 1R232 for holding Sleeve firmly

for easy removal of Ring spring 11.

Ring spring 11

Anvil

complete

1R232

Fig. 21

Flat washer 12, Compression spring 13 and

Sleeve can now be removed from Anvil.

Flat washer 12

Compression spring 13

Sleeve

Anvil

1R232

ASSEMBLING

Assemble in the reverse order of disassembly. (Figs. 19, 18 and 17)

Fig. 20

Raise this side (opposite to the expanded side) with index finger

when removing Ring spring 11.

Press the top of Sleeve

with thumb so as no to allow

Compression spring 13

to pop out and away.

Anvil and Nylon washer 14 can now be removed from

Be careful not to lose Steel ball 3.5.

Ring spring 11

Expand the end gap of

Sleeve

Ring spring 11 with 1R291.

Nylon washer 14 Anvil

Steel ball 3.5 (2psc.)

P 8/13