ALIBI ALI-NS2024R Посібник зі швидкого встановлення - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Цифрова камера ALIBI ALI-NS2024R. ALIBI ALI-NS2024R 6 сторінок. 4mp ip low light turret camera

Друкувати сторінку

ALIBI ALI-NS2024R Посібник зі швидкого встановлення

Click on the message to install the plugin.

In the message bar at the bottom of the screen, click Run. Follow the on-screen instructions

to install WebComponents. When the following screen opens, click Finish.

The Live View screen with the camera video image should appear.

Screen select tabs

www.observint.com

Live View image

Logout button

Capture, Record, Zoom icons

Step 6.

Adjust the camera for your surveillance target

Loosen the camera lock screw, if necessary, so that the turret can easily be moved within the

enclosure.

While observing live video from your camera in the Live View tab (see above), adjust the enclosure

Pan, Turret Tilt and Turret Rotate to point the camera at the center of your surveillance target.

Tighten the lock screw to hold the camera in position.

Enclosure (pan 0˚ ~ 360˚)

Reinstall the trim ring. Turn the ring counter-clockwise to lock it in place.

After adjusting the camera for the preferred field of view, click the Setup tab, and then click the

Image link in the left frame.

Adjust the Brightness, Contrast, Saturation and Sharpness of the image as follows.

Image Adjustment submenu (see above): Adjust the Saturation, Hue, Brightness, Contrast

—

and Sharpness of the video image. Each parameter can be set to a level of 0 ~ 100 either by

moving the slider or entering the value in the box on the right. The effect of the adjustment

will appear in the Live View image in the menu.

Open the other submenus on this screen. Adjust the following as needed. Refer to the Camera

Firmware User Manual for your camera for additional information about parameter settings.

Exposure Settings submenu: In this submenu, set the following for the best performance:

—

Iris Mode: Select Auto or Manual. Some cameras may not offer both options.

Exposure Time: Value ranges from 1/3 to 1/100,000 s. The nominal value is 1/150.

Adjust it according to the lightening condition.

Gain: Set the gain to show the optimal brightness level.

Switch Day and Night: Select either Auto-Switch, Scheduled-Switch, or Triggered

—

by Alarm Input.

If using Auto-Switch, open the Day/Night Switch submenu to select the Sensitivity,

Filtering Time, and Smart IR feature ON or OFF.

If using Scheduled Switch, set the Start Time and End Time of the switch, then open

the Day/Night Switch submenu to select the Smart IR feature ON or OFF.

Also, click the Common, Day and Night tabs to set the Saturation, Hue, Brightness,

Contrast and Sharpness for Day and for Night modes.

Day/Night Switch submenu: You can set the Day/Night switch to Day, Night, Auto, or

—

Schedule. The option you select determines the submenu options.

Day or Night: These options both have one parameter: Smart IR.

Auto: If you select Auto switch, you can set the sensitivity (0 .. 7), filtering time and

Smart IR.

Lock Screw

Turret (tilt 0 ~ 75˚)

Turret (rotate 0 ~ 360˚)