JamHub Tracker MT16 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Диктофон JamHub Tracker MT16. JamHub Tracker MT16 20 сторінок. Portable multitrack recorder
Також для JamHub Tracker MT16: Посібник користувача (20 сторінок), Посібник (2 сторінок)
Друкувати сторінку
Monitoring
When your Tracker is armed, the unmixed audio will play through the headphone
jack, allowing you to monitor during sound check, confirming levels and clarity.
Use
and
to control the output volume.
Monitoring will turn off when you begin recording.
Recording
Once you have armed your Tracker MT16, you can begin capturing audio by pressing
You will see the REC light come on to assure you that all is going according to plan.
The LCD screen will display a variety of information, including the name of your
track, the sample rate at which it is being recorded, the length of time you have been
recording, and the amount of space you have left on your SD card.
Note: Your Tracker MT16 will monitor the space left on your SD card and take the
precaution of properly ending your recording when levels drop below a certain
threshold to allow for proper encoding.
In COMBINED mode, your recording will stop when you have less than 100MB of free
space. In SPLIT mode, your recording will stop when you have less than 2GB of free
space.
To stop recording, press
until you press .
Menu Top
»
Record ON
»
Press
to start and stop recording
»
Pressing stop will finalize the recorded file by displaying Encoding...
if SPLIT mode was selected this may take a significant quantity of time. We
highly recommend using COMBINED mode to avoid long encoding times.
NOTE: Wait until encoding is complete to avoid any loss of recorded files.
New Track
While your Tracker is actively recording, you can press
track without waiting for encoding. The file name will advance by 1, and the timer
will reset.
again. Your Tracker MT16 will remain armed for recording
at any time to start a new
.
15