Lexmark 10G0300 - T 632 B/W Laser Printer Короткий довідник - Сторінка 8
Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Lexmark 10G0300 - T 632 B/W Laser Printer. Lexmark 10G0300 - T 632 B/W Laser Printer 9 сторінок. Setting up the printer base
Також для Lexmark 10G0300 - T 632 B/W Laser Printer: Посібник з монтажу (13 сторінок)
Друкувати сторінкуAccessing jam areas
You open doors and covers, remove trays, and remove options to access jam areas. The illustration shows the
location of sources and possible jam areas. Be sure to remove any print jobs from the standard bin before opening
the upper front door.
CAUTION:
Floor-mounted configurations require additional furniture. You must use either a printer stand or
printer base if you are using a 2000-sheet drawer, a duplex unit and an input option, or more than
one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, you
may need additional furniture.
27x Paper Jam
28x Paper Jam
Rear door of:
5-bin mailbox
Output expander
(high-capacity
output stacker
and finisher
not shown)
202 Paper Jam
Printer rear door
23x Paper Jam
Duplex rear door
250 Paper Jam
Lower front door
(down when envelope
feeder is installed)
24x Paper Jam
Standard input tray
Warning:
Do not attempt to clear any jam using tools or instruments. This may permanently damage the
printer.
Page 8 of 8
200 Paper Jam
201 Paper Jam
Upper front door
260 Paper Jam
Envelope feeder
23x Paper Jam
Duplex front access cover
(remove standard input tray)
24x Paper Jam
Paper trays