HIKVISION DS-9600NI-H8 Посібник з монтажу - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з монтажу для ВІДЕОРЕЄСТРАТОР HIKVISION DS-9600NI-H8. HIKVISION DS-9600NI-H8 14 сторінок.
Друкувати сторінку
Installation Manual of DS-9600NI-H8
3.2 Rear Panel Introduction
1
No.
1
USB Interface
2
AUDIO IN
3
AUDIO OUT
4
VGA
5
HDMI1/HDMI2
6
RS-232 Interface
7
eSATA
8
LAN Interface
9
Termination Switch
RS-485 Interface
10
Controller Port
ALARM IN
11
ALARM OUT
12
GROUND
13
AC 100V ~ 240V
14
POWER
2
5
3
4
Figure 3. 2 Rear Panel View
Table 3. 2 Rear Panel Description
Item
Universal Serial Bus (USB) 3.0 ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
RCA connector for audio input.
RCA connector for audio output.
DB9 connector for VGA output. Display local video output and menu.
HDMI/HDMI2 video output connectors.
Connector for RS-232 devices.
Connects external SATA HDD, CD/DVD-RW.
2 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interfaces.
RS-485 termination switch.
Up position is not terminated.
Down position is terminated with 120Ω resistance.
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins
of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the
first NVR D+, D- pin should be connected with the D+, D- pin of the next
NVR.
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when NVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
6
7
910
11
12
8
Description
4
13
14