Lexmark 21Z0300 - Laser Printer Government Compliant Короткий довідник - Сторінка 5
Переглянути онлайн або завантажити pdf Короткий довідник для Принтер Lexmark 21Z0300 - Laser Printer Government Compliant. Lexmark 21Z0300 - Laser Printer Government Compliant 10 сторінок. Lexmark c935: supplementary guide
Також для Lexmark 21Z0300 - Laser Printer Government Compliant: Посібник з друку (4 сторінок)
Друкувати сторінку
Notes:
•
If you insert the memory device when the printer requires
attention, such as when a jam has occurred, the printer
ignores the memory device.
•
If you insert the memory device while the printer is
printing other jobs, Printer Busy appears. After the
other jobs are processed, you may need to view the held
jobs list to print documents from the flash memory device.
3
Press
until
appears next to the document you want to
print, and then press
.
Note: Folders found on the flash memory device appear as
folders. File names are appended by the extension type (for
example, .jpg).
4
Press
to print one copy, or enter the number of copies using
the keypad, and then press
to initiate the print job.
Note: Do not remove the USB flash memory device from the
USB Direct interface until the document has finished printing.
If you leave the USB flash memory device in the printer after
leaving the initial USB menu screen, you can still print .pdf's
from the USB flash memory device as held jobs.
Canceling a print job from the
control panel
If the job is formatting or already printing, and Cancel a job
appears on the first line of the display:
1
Press
until
Cancel appears.
A list of jobs appears.
2
Press
until
appears next to the job you want to cancel,
and then press
.
Canceling <filename> appears.
Note: Once a print job is sent, to easily cancel a job, press
Stopped screen appears. Press
until
Cancel a job
appears, and then press
.
Maintaining the printer
Replacing the waste toner box
Replace the waste toner box when 82 Replace waste toner
box appears. The printer will not continue printing until the waste
toner box is replaced.
1
Waste toner box
2
Door E6
3
Door E
4
Printhead lens cleaner
5
E6 Door tab
. The
5
1
Unpack the replacement waste toner box and accessories.
2
Open Door E (front printer door).
Warning—Potential Damage: To avoid overexposing the
photoconductors, do not leave the door open for more than
10 minutes.