Garden Gear M1E-LD-115 Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент Garden Gear M1E-LD-115. Garden Gear M1E-LD-115 18 сторінок. Hedge and edge trimming shears
Друкувати сторінку
Blades can cause injury. Do not press the safety lock of the shear during
maintenance work.
Never clean the trimming shears in water (especially running water), as there
is a risk of personal injury and damage to the shears.
To obtain good cutting results, always make sure the blades are sharp,
•
and clean them from time to time with a soft dry cloth.
For easier operation and longer blade life, use light machine oil to
•
lubricate the trimming and grass shear blades before and after each use.
Check the condition of the cutting edges of the blades, and always
•
immediately remove notches and burrs caused by stones etc.
Re-sharpening the trimming blade (Fig.8):
1) Allow the trimming blade to stop completely.
2) Clamp the blade assembly in a vice and file the exposed cutting surface of
each blade tooth, making sure the original angle of the tooth is maintained
(Fig.8).
3) Remove the trimming blade from the vice, start and stop the shear so that
the unsharpened edges of the blade teeth are exposed.
4) Repeat the sharpening procedure as described above.
Fig. 8
Blade Maintenance
Blade Maintenance
Blade Maintenance
Blade Maintenance
13