Corsa HS80 RGB USB Посібник із швидкого старту - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Гарнітури Corsa HS80 RGB USB. Corsa HS80 RGB USB 6 сторінок.

ENGLISH

CONTROLS AND FEATURES SECTION

A — CORSAIR HS80 RGB USB HEADSET

B — QUICK START GUIDE

C — VOLUME CONTROL

D — MICROPHONE STATUS LED

E — RGB LED LIGHT

F — MUTE BUTTON / iCUE CONTROL

GETTING STARTED WITH YOUR HS80 RGB USB HEADSET

> Connect your headset to a USB port on your PC.

> Go to corsair.com/support/downloads to download the Corsair Utility Engine ("iCUE") Software. Using the

iCUE software will enable the full feature set of your headset.

NOTE: if the headset is used without software, some features will be disabled.

> Install the iCUE software on a PC running Windows

> After installation is complete, reboot your PC, and launch iCUE.

iCUE SOFTWARE CAN BE USED TO

> Choose your RGB color preference and light intensity.

> Select and customize audio equalizer (EQ) settings.

> Adjust microphone input volume, and microphone side tone.

> Set 7.1 surround sound on or off.

NOTE: Prolonged listening at high volumes may adversely affect your hearing.

Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.

MIC / iCUE CONTROL

Flip-up microphone to mute. Flip-down microphone to unmute. Or use the mute button on the left ear cup

to toggle on / off. NOTE: iCUE software can also be used to change the function of this button.

For best performance, bend the flexible microphone boom to best fit near the left corner of your mouth.

We've found that a 30-degree bend is a good place to start, but feel free to increase or decrease this if your mic

is too loud or too soft.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the

double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

10 or later.

ENGLISH