HIKVISION HiLook Series Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для ВІДЕОРЕЄСТРАТОР HIKVISION HiLook Series. HIKVISION HiLook Series 17 сторінок. Smart hybrid light bullet & turret camera
Також для HIKVISION HiLook Series: Посібник із швидкого старту (18 сторінок), Посібник користувача (18 сторінок), Посібник користувача (14 сторінок), Посібник користувача (20 сторінок), Посібник користувача (18 сторінок), Посібник користувача (13 сторінок)

Друкувати сторінку
HIKVISION HiLook Series Посібник користувача
1.2.3 Overview of Type III Camera
Switch Button
Power Cord
Figure 1-3 Overview of Type III Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.4 Overview of Type IV Camera
Enclosure
Base
Installation Plate
Figure 1-4 Overview of Type IV Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with your
power output to avoid damage.
Make sure the wall is strong enough to withstand three
times the weight of the camera and the mount.
If the product does not function properly, contact your
dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I & II Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1. Paste the drill template (supplied) to the installation
location.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Secure the camera to ceiling with three PA4 × 25
screws (supplied).
Base
Video Cable
Installation Plate
Enclosure
Microphone
Main Body
Switch Button
Video Cable
Main Body
Power Cord
I N
D C1 2V