Lexmark 34S0109 - E 260dt B/W Laser Printer Посібник з технічного обслуговування - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з технічного обслуговування для Принтер Lexmark 34S0109 - E 260dt B/W Laser Printer. Lexmark 34S0109 - E 260dt B/W Laser Printer 11 сторінок. Maintenance guide
Також для Lexmark 34S0109 - E 260dt B/W Laser Printer: Короткий довідник (10 сторінок), Аркуш налаштувань (2 сторінок)
Друкувати сторінку
To access printer menus:
•
Open the Embedded Web Server by typing the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
•
If the printer is connected to the computer by a USB or parallel cable, open the Local Printer Settings Utility for
Windows or Printer Settings for Macintosh. One of these utilities installs with the printer software.
Supply
Toner
Paper or specialty media
Conserving supplies when printing multiple copies
If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy
before printing the remaining copies.
Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Path to menu item
From the Quality menu, you can adjust
the Toner Darkness setting.
From the Finishing menu, you can adjust
the N‑up (Multipage Print) setting.
From the Finishing menu, you can select
Duplex.
Maintaining the printer
4
Purpose of menu item
Lets you adjust the level of toner
released on a sheet of paper or specialty
media. The values range from 1 (lightest
setting) to 10 (darkest setting) with 8
being the factory default setting.
Lets you select to print two or more page
images on one side of a sheet. Values for
N‑up are 2-Up, 3-Up, 4-Up, 6-Up, 9-Up,
12-Up, and 16‑Up.
Lets you print on both sides of a sheet of
paper