Janam XG series Посібник із швидкого старту - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Зчитувач штрих-коду Janam XG series. Janam XG series 14 сторінок.

Getting Started

A. INSTALLING THE BATTERY

1. Insert the top of battery into chamber opening and gently slide battery into battery chamber (Figure 1).

Do not force past point of resistance.

2. Turn the battery so that the base of the battery is perpendicular to the device handle (Figure 2).

This aligns the battery notches with the battery chamber which is required to insert the battery.

3. Once the battery is properly aligned with the handle, press the battery into the battery chamber.

4. Rotate the battery base clockwise until the base of the battery is parallel with the device. The battery release plunger

will click and lock the battery into place (Figure 3).

B. REMOVING THE BATTERY

1. To remove the battery, fully press the battery release plunger and hold while rotating the battery counter-clockwise until

it stops (battery base will be perpendicular to device handle).

2. Grip the battery base and pull battery from battery chamber.

Figure 1

BATTERY

Janam

XG Series Quick Start Guide

Figure 2

Perpendicular

Figure 3

Parallel

Battery

Release

Plunger

Base of

Battery