Garden PAC InverTech GHD-150-0223 Посібник з встановлення та експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з встановлення та експлуатації для Тепловий насос Garden PAC InverTech GHD-150-0223. Garden PAC InverTech GHD-150-0223 20 сторінок.
Друкувати сторінку
Size(mm)
Model
GHD-150-0219
GHD-150-0220
GHD-150-0221
GHD-150-0222
GHD-150-0223
GHD-150-0224
GHD-150-0225
GHD-150-0226
GHD-150-0227
Above data is subject to modification without notice.
※
2.2.2. Heat pump installation.
① The frame must be fixed by bolts (M10) to concrete foundation or brackets. The
concrete foundation must be solid; the bracket must be strong enough and anti-rust
treated;
② The heat pump needs a water pump (Supplied by the user). The recommended pump
specification-flux: refer to Technical Parameter, Max. lift ≥10m
③ When the heat pump is running, there will be condensation water discharged from the
bottom, please pay attention to it. Please insert the drainage tube(accessory) into the
hole and clip it well, then connect a pipe to drain off the condensation water.
2.2.3. Wiring & protecting devices and cable specification
① Connect to appropriate power supply, the voltage should comply with the rated voltage
of the products.
② Well earth the heat pump.
③ Wiring must be connected by a professional technician according to the circuit diagram.
④ Set breaker or fuse according to the local code (leakage operating current ≤ 30mA).
⑤ The layout of power cable and signal cable should be orderly and not affecting each
other.
Name
A
B
315
590
315
590
315
590
315
590
395
590
395
590
395
720
395
720
505
790
For installers and professionals
C
D
E
312
340
961
312
340
961
312
340
961
312
340
961
392
420
961
392
420
961
392
420
1092
392
420
1092
496
530
1161
- 10 -
F
G
H
250
74
658
280
74
658
340
74
658
340
74
658
390
74
658
460
74
758
620
74
958
620
74
958
650
74
958