AVAPOW A07 Посібник - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для Пульт дистанційного керування AVAPOW A07. AVAPOW A07 10 сторінок. Multi-function car jump starter
Друкувати сторінкуJumper Clamp Indicator Instruction
Item
Input low
voltage
protection
Input high
voltage
protection
Work instruction
Reverse
connection
protection
Short circuit
protection
Start timeout
protection
Connect to the
high voltage
alarm
Automatic
anti-virtual
electricity
function
Technical
parameters
The red light is always on, the green light is
13.0V±0.3V
off, and the buzzer does not sound.
The red light is always on, the green light is
18.0V±0.5V
off, and the buzzer does not sound.
When working normally,the green light is
always on, the red light is off, and the buzzer
Support
beeps once.
The red/black clip of the wire clip is
reversely connected to the car battery
Support
(battery voltage ≥0.8V), the red light is
always on, the green light is off, and the
buzzer sounds at short intervals.
When the red and black clips are
short-circuited, no sparks, no damage, the
Support
red light is always on, the green light is off,
the buzzer 1 long and 2 short beeps.
The red light is always on, the green light is
90S±10%
always on, and the buzzer does not sound.
The clip is mistakenly connected to battery
that is >16V, the red light is always on, the
Support
green light is off, and the buzzer sounds
slowly and shortly.
When the car battery voltage is higher than
the Starter battery voltage, the output is
automatically turned off and the green light
is on,at this time, it can be ignited normally.
Support
If the car battery voltage drops and is lower
than the starter battery voltage during the
ignition process, the smart clip will
automatically turn on the output to complete
the startup process.
Instruction
07