AVAPOW A27 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Пульт дистанційного керування AVAPOW A27. AVAPOW A27 10 сторінок. Multi-function car jump starter
Друкувати сторінкуJumper Clamp Indicator Instruction
Item
Input low
voltage
protection
Input high
voltage
protection
Reverse
connection
protection
Short
circuit
protection
Multi-frequency
protection
Work instruction
Standby
instruction
Car battery
voltage
detection
Technical
parameters
When the power of the jump starter is too
low, after connecting the starter and the
car，the "
14.0V±0.5V
sounds once every 1 second, and the
current voltage of the starter power is
displayed.
When the car voltage is too high, after
connecting the starter and the car,the "
17.5V±0.5V
" character flashes and the buzzer beeps for
a long time.
When the red/black clips of the wire clip is
reversely connected to the car battery
Support
(battery voltage ≥0.8V), the "
the "
once every 1 second.
When the red and black clips are
short-circuited in the standby state,
Support
the "
flashes,the buzzer sounds once every 1
second.
When start up to 8 times continuously,the
8 times
"
When working normally, display the voltage
Support
of the current jump starter.
The"
Support
from left to right.
When the wire clip is only connected to the
car battery (the car battery voltage needs to
Support
be ≥8V), the"
current car battery voltage is displayed.
Instruction
" symbol is on, the buzzer
"symbol flashes, the buzzer sounds
"symbol is on, the "
"symbol flashes.
" symbol circulate instructions
" symbol is on, and the
"symbol is on,
"symbol
07