Garden Sun HPS-C-SH Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Обігрівач для внутрішнього дворика Garden Sun HPS-C-SH. Garden Sun HPS-C-SH 11 сторінок. Tabletop

Друкувати сторінку

1. Turning on the Heater

Assembly

Step 1 – Attach Cast iron Assembly to Base

Take out all the parts of the Tabletop Heater.

Aim the Cast iron at the Base holes.

Use 4pcs M6X15mm bolts and fix the Tank housing

to the Base & Cast iron.

Tighten the bolts as above show.

Step 2 – Attach Burner Assembly to Tank Housing

Put the Burner on the Tank Housing then fix them with

4pcs 3/16" bolts.

Fix the Regulator to the Tank Housing with each one of

the M5X10mm bolt & M5 nut.

Step 3 – Emitter screen Assembly

Fix 3pcs pins of 60mm length to the Emitter screen with 3pcs

M5 nuts then tighten them.

Put the Emitter screen on the Burner. Use 4pcs 3/16" bolts to

connect the Emitter screen to the Burner.Tighten the bolts.