Jandy Infinite WaterColors IWC15W100 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Контролер Jandy Infinite WaterColors IWC15W100. Jandy Infinite WaterColors IWC15W100 16 сторінок. Nicheless led light
Також для Jandy Infinite WaterColors IWC15W100: Посібник з монтажу та експлуатації (12 сторінок), Посібник (2 сторінок)
Друкувати сторінку
Jandy
Infinite WaterColors
®
4.
From the IWC Lights Zone
Setup screen, choose Zone
Name.
5.
From the IWC Lights Rename
screen, choose the zone you
want to name and enter the
name.
6.2
Select Color
1.
Choose equipment on the
OneTouch display screen and
press select.
Section 7.
Go to iaqualink.com for more information on controlling your Infinite
WaterColors lights through Amazon Alexa.
Section 8.
Do not keep the winter water level at the level of the light. Make certain that
the water level is left at least 4" or more above or below the light depending
on the pool's other winterization needs. Consult a Local Swimming Pool
Professional for proper winterization. At NO TIME should there be water
removed from the pool without checking ground water tables.
Section 9.
Use the troubleshooting information in the following table for suggestions.
Problem
Lights are out of sync
Nicheless LED Light | Owner's Manual
™
Amazon Alexa Light Control
Winterizing
Troubleshooting
Possible Cause
Zones are set
differently
2.
Scroll through the menu and
select the desired light zone.
3.
From the list of preset colors
and light shows, select the
desired color.
NOTE To turn off lights, re-select
the light zone and wait 5
seconds.
NOTE Custom color can only be
adjusted using the iAquaLink
app.
Corrective Action
Check that lights are in the
same zone or the same light
show is applied to all zones.
ENGLISH
Page 15