Lexmark C925 Короткий довідник

Quick Reference

Loading paper and

The Paper Size setting is automatically sensed according to the

position of the paper guides in each tray except in the standard

150-sheet tray (Tray 1) and in the multipurpose feeder. The Paper Size

setting for Tray 1 is set manually via the wheel on the tray, while the

Paper Size setting for the multipurpose feeder is set in the Paper Size

menu.

From the home screen, navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the

paper size or type >

Only Tray 1 has Plain Paper as the factory default Paper Type setting.

Custom 2, 3, 4, 5, and 6 are the default settings for the other trays.

Loading the standard or optional

550-sheet tray

The printer has standard150- (Tray 1) and 250-sheet trays (Tray 2), and

it may have one or more optional 550-sheet trays. All 550-sheet trays

support the same paper sizes and types. The only sizes that are

supported for both long-edge and short-edge feeding are Letter and

A4. Anything longer than A4 should be fed with the short edge of the

page entering the printer first, anything shorter should be fed with

the long edge of the page entering the printer first.

Any unusual sized sheets or heavy weight media should be loaded

into the multipurpose feeder, which can support up to 50 sheets.

CAUTION—TIPPING HAZARD: To reduce the risk of

equipment instability, load each paper drawer or tray

separately. Keep all other drawers or trays closed until needed.

Pull the tray out.

Notice the size indicators at the bottom of the tray. Use these

indicators to help position the guides.

Make sure to unlock the width guide lock at the rear of the tray.

Squeeze the width guide tabs as shown, and then slide the guide

to the correct position for the paper size being loaded.

Note: Always use the paper width guide lock at the rear of the

tray to prevent the margins from being knocked out of

adjustment.