Avaya IP Office 20DT Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон Avaya IP Office 20DT. Avaya IP Office 20DT 18 сторінок.
Також для Avaya IP Office 20DT: Посібник користувача (18 сторінок), Посібник користувача (18 сторінок)
Друкувати сторінку
Page 8 - Set-Up
Set-Up
Profiles
Silent Mode
Backlight Display
Page 8 - Profiles
Your 20DT handset can be set-up for two user-defined profiles.
• Indoors (1) e.g. for office working
• Outdoors (2) e.g. for use in a manufacturing environment.
Within each profile you can set-up different parameters for:
• Back Lighting On/Off: See page 8.
• Start Volume: See page 9.
• Ringer Tone: See page 10.
• Ringer Volume: See page 10.
• B-Answer On/Off: See page 10.
• Key Click On/Volume: See page 12.
• Vibrator On/Off: See page 12.
• Out of Range Indicator: See page 12.
You can also set your DECT 20DT handset to operate in a totally silent mode
(see page 8).
To select Profile 1 or 2:
1. Press MENU* and
2. Press > until required profile appears.
3. Press
to select profile and continue with setting up of the parameters (see
above). Press MENU to finish.
* Note: On older menu structures (see pages 3 and 4), after pressing MENU,
press >to display PROFILE SET UP. Press
profile appears. Press
If you do not want your 20DT to ring when an incoming call is presented, you can
select Silent Mode (not available when twinned with a desk top phone). You can
also Mute your microphone during a call (see page 9).
1. Press MENU followed by SILENT. SILENT appears and your 20DT will vibrate
when incoming calls are presented. Refer to page 12 for details on how to turn
the vibrating option on.
2. To return to normal use, repeat the above. SILENT disappears and a tone is
given.
You can select if your 20DT handset display is to be backlit.
1. Press MENU* and
2. Press > until required profile appears and then press
3. Press > until BACKLIGHT appears and then press
(Use < and > to select ON or OFF.)
4. When done, press
* Note: On older menu structures (see pages 3 and 4), after pressing MENU,
press >to display PROFILE SET UP. Press
profile appears. Press
. SET PROFILE/PROFILE 1 appears.
and continue from step 3.
. SET PROFILE/PROFILE 1 appears.
to save and MENU to finish.
and continue from step 2.
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 4 (27th October 2003)
and > until required
.
.
and > until required