Gardena 6000/5 inox automatic Посібник оператора - Сторінка 6

Друкувати сторінку

Gardena 6000/5 inox automatic Посібник оператора

IMPORTANT!

v Dispose of the product through or via your municipal recycling

collection centre.

5. MAINTENANCE

Clean priming area [ Fig. M1 ]:

DANGER! Electric shock!

There is a risk of injury from electric shocks.

V Disconnect the Deep Well Pump from the mains power supply

before carrying out maintenance.

1. Unscrew both screws

and remove the inlet filter

2. Clean priming area of the pump and inlet filter

3. Fix inlet filter

around the priming area again and screw tight with the

two screws

6. TROUBLESHOOTING

DANGER! Electric shock!

There is a risk of injury from electric shocks.

V Before eliminating faults, disconnect the Deep Well Pump from

the mains power supply.

Problem

Possible Cause

Pump is running,

Air cannot escape as the

but doesn't deliver

pressure line is closed.

Priming area blocked.

When starting the pump,

water height falls below the min.

water level.

Nonreturn valve blocked.

Pump doesn't start or

Thermal protection switch

suddenly stops during

switched pump off due to

operation

overheating.

Power supply interrupted.

Dirt particles are trapped in

priming area.

Pump runs, but output

Priming area blocked.

suddenly decreases

For Art. 1499 only:

Lack of water: Dry run

protection switched the

pump off due to insufficient

water level.

NOTE: For any other malfunctions please contact the GARDENA service depart-

ment. Repairs must only be done by GARDENA service departments or specialist

dealers approved by GARDENA.

7. ACCESSORIES

GARDENA Fitting

For optimum utilisation of the pumping

capacity of the pump.

GARDENA Pump Connection

If the hose connection is to be detached

Set

frequently.

For Art. 1489 / 1492 only:

Deactivates the pump automatically if

GARDENA Dry-Running

the pumped medium fails to flow.

Safety *

For Art. 1489 / 1492 only:

With DryRunning Safety. Ideal for converting

GARDENA Electronic

a pump into a pressure tank unit.

Manometric Switch *

* GARDENA Dry Running Safety / Electronic Manometric Switch must not be installed directly on the

pump, as they must not be submerged in the water.

8. TECHNICAL DATA

Deep Well Pump

Rated Power

Max. delivery capacity

Max. pressure /

Max. delivery height

Max. submersion depth

Power cable

Pump connection

Min. water level for

operation(from the top

edge of the filter)

Weight without cable

(approx.)

Fastening rope

Casing diameter (max.)

Max. media temperature

Mains voltage /

Mains frequency

* If used in a well pipe of 10 cm diameter, the max. delivery capacity is not reached.

9. SERVICE / WARRANTY

Remedy

Service:

v Open pressure line

Please contact the address on the back page.

(e. g. bent pressure hose).

Warranty:

v Disconnect mains plug

In the event of a warranty claim, no charge is levied to you for the services

and clean priming area

provided.

(see 5. MAINTENANCE).

GARDENA Manufacturing GmbH offers a two-year warranty (effective

v Immerse pump deeper

as of the date of purchase) for this product. This warranty includes all

(observe minimum water

significant defects of the product that can be proved to be material or

level: see 8. TECHNICAL

DATA).

manufacturing faults. This warranty is fulfilled by supplying a fully func-

tional replacement product or by repairing the faulty product sent to us

v Art. 1499: Contact GARDENA

free of charge; we reserve the right to choose between these options.

Service.

This service is subject to the following provisions:

v Disconnect mains plug

• The product was used for its intended purpose as per the recommen-

and clean priming area

dations in the operating instructions.

(see 5. MAINTENANCE).

Observe max. media

• Neither the purchaser nor a third party has attempted to repair the

temperature (35 °C).

product.

v Check fuses and electrical

This manufacturer's warranty does not affect warranty entitlements

plugin connections.

against the dealer / retailer.

v Disconnect mains plug

If problems arise with this product, please contact our Service depart-

and clean priming area

ment or send the defective product along with a brief description of the

(see 5. MAINTENANCE).

fault to GARDENA Manufacturing GmbH, making sure to have sufficiently

v Disconnect mains plug

covered any shipping costs and to have followed the relevant postage

and clean priming area

and packaging guidelines. A warranty claim must be accompanied by

(see 5. MAINTENANCE).

a copy of the proof of purchase.

The pump is only operational

Consumables:

when it is submerged at least

15 cm.

The wear part turbine is excluded from the warranty.

v Submerge pump at least

Pumps damaged by frost are excluded from the warranty.

15 cm in water.

Art. 1723 / 1724

Art. 1752

Art. 1741

Art. 1739

Unit

Value (Art. 1489) Value (Art. 1492) Value (Art. 1499)

850

950

l/h

5,500 *

6,000 *

bar / m

4.5 / 45

5.0 / 50

22 H07RNF

40 (1 1/4)

mm (")

female thread

> 15

7.5

8.25

< 98

°C

V / Hz

220 – 240 / 50

950

6,000 *

5.0 / 50

22 H07RNF

33 (1)

female thread

> 15

< 98

220 – 240 / 50