Gardena 7645 Інструкція з експлуатації Посібник з експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Водяний насос Gardena 7645. Gardena 7645 7 сторінок. Fountain pump set
Друкувати сторінку
4. Initial Operation
Switching the
1. Place water feature pump on a firm base in such a way that the
filter housing
Fountain Pump on:
2. Plug mains plug into an AC power socket.
Warning: Pump will start immediately.
3. Use the nozzle tube regulating hole
6
3
amount of water for the Fountain (see 3. Assembly "side outlet").
5. Storing your Fountain Pump Set
Storage:
The pump should be stored out of the reach of children.
1. Before the frosty season begins, take the pump out of the
pond, clean it and store it in a frost-free place.
2. To avoid difficulties when starting up in the spring, we recom-
mend storing the pump in a frost-free location in a container
filled with water.
The mains plug must not be submerged.
Disposal:
The product must not be added to normal household waste.
(in accordance with
It must be disposed of properly.
RL2002/96/EC)
6. Cleaning
Cleaning the fountain and
filter housing:
5
1. Take the Fountain Pump out of the water.
2. Unscrew the nozzle tube and the socket
3. Take the fountain insert out of the fountain socket
4. Release the catches
5. Remove the pump from the filter housing
6
6. Clean the nozzle tube and fountain insert in clean water.
7. Clean the filter housing
8. Reassemble the Fountain Pump in the reverse order.
1
7
10
6
is completely covered by water.
3
to set the desired
CAUTION! Electric shock !
Risk of injury due to mains electricity.
v Before cleaning the pump, unplug the it from
the mains.
1
.
5
7
6
and open the filter housing
6
.
6
with a water jet.
7. Trouble-shooting
Cleaning the pump:
A
8
9
Fault
No water feature operating
Reduced water feature
CAUTION!
If any other faults arise, please contact GARDENA Service.
8. Accessories
.
GARDENA Underwater lights
UL 20 / UL 35 / UL 20 S Set
GARDENA radio control set
CAUTION! Electric shock!
Risk of injury due to mains electricity.
v Before fault-finding, unplug the pump at the
mains.
1. Remove the pump from the filter housing (see 6. Cleaning).
2. 500 S: Release the catches
9
remove the pump housing
1000 S: Turn the pump housing
vertically off the motor housing
A
3. Pull impeller unit
out of the motor housing
A
4. Push cleaned impeller unit
0
5. 500 S: Press the pump housing
1000 S: Press the pump housing
0
motor housing
and tighten it clockwise. Make sure that the
B
O-ring
is seated correctly.
B
Possible cause
Mains plug not plugged in.
Impeller unit is blocked.
Water feature insert is dirty.
Filter housing dirty.
Open the side outlet.
Work on the electrical parts must only be carried out by
GARDENA Service Centres.
Lighting the Fountain and the bank area.
Start water features and lighting from
the terrace or your living room.
8
9
on the pump housing
and
.
9
anticlockwise and pull it
0
(bayonet socket).
0
and clean.
0
back into the motor housing
.
9
0
on to the motor housing
.
9
vertically on to the
Remedy
v Plug in mains plug.
v Clean pump.
v Clean water feature insert.
and nozzle pipe.
v Clean filter housing.
v Close the side outlet using
the regulating hole.
art. 7952
art. 7954
art. 7958
art. 7874
11