Avaya IP Office Phone Manager Допомога у працевлаштуванні - Сторінка 4

Переглянути онлайн або завантажити pdf Допомога у працевлаштуванні для IP-телефон Avaya IP Office Phone Manager. Avaya IP Office Phone Manager 6 сторінок. Ip office discontinued control unit
Також для Avaya IP Office Phone Manager: Допомога у працевлаштуванні (8 сторінок), Примітки щодо застосування (17 сторінок), Примітки щодо застосування (17 сторінок), Посібник користувача (4 сторінок), Посібник користувача (7 сторінок)

Using the DECT Site Survey Kit

Performing the Survey

Using the DECT Site Survey Kit

IP Office - Job Aid

Position the Survey Base Station in the potential position for a base station

installation. Connect the power supply. If possible, also connect an audio

source via either the telephone line or audio jack sockets.

1. With a subscribed handset on-hook, dial *99981* and press ENTER.

2. The handset display shows the signal quality.

RPN: 01

Q52: 52

RSSI: 64

3. Take the handset off-hook as this will ensure more realistic figures.

–

If you have connected an audio source you will hear it whilst off-

hook. Use this facility to check the audio quality (only one handset

can be off-hook and receive the audio source at any time).

4. Check the boundaries of the Survey Base Stations coverage where

Q52 is greater than 52 and RSSI is greater than 64. Mark this area

on the building plans for all areas that the CDBS might have to serve.

5. Where Repeaters are to be used, repeat the above process.

6. To return the handset to normal operation, press and hold < until you

hear a short bleep.

Subscribing to the Survey Base Station

<< Base station number.

<< Speech quality (target 52+).

<< Signal strength (target 64+).

Page 4

067 Issue 1 (8th July 2003)