Avaya IP406 V2 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для IP-телефон Avaya IP406 V2. Avaya IP406 V2 7 сторінок. Ip office discontinued control unit
Друкувати сторінку
IP Office IP406 V2 Control Unit
The IP406 V2 control unit is a stackable unit with an optional 19" rack mounting
kit. The IP406 V2 includes:
The IP406 V2 includes 8 digital station (DS) and 2 analog phone (single line telephone) ports. It includes an
eight port Ethernet LAN switch (unmanaged Layer 2) and Compact Flash card slot for an optional embedded
voicemail memory card.
It supports up to 6 external expansion modules plus IP extensions controlled through its LAN interface.with a
maximum configuration of 250 of various types in combination. Analog only: 182. DS only: 188. IP only: 90.
8 Digital Station (DS) ports for selected 2400, 5400, 6400 and T3 Series phones plus 3810 wireless (US)
phones.
2 Analog telephone (single line extensions)ports.
Dual-PRI in Slot A. internal expansion module support for increased trunk capacity.
8 10/100 Mbps LAN Switched ports (Layer-2, unmanaged).
Support for optional embedded voicemail/auto-attendant (Compact Flash card)
9-pin DTE Port (for maintenance or serial dongle connection for PC-less licensing).
X.21/V35 WAN interface.
Support for 6 Expansion Modules.
External output port containing two switches for door entry systems.
Audio port for external music on hold source.
40 Data channels (Maximum 20 useable for Voicemail Pro).
A data channel is used whenever a call is made from the IP network to an exchange line (Central Office).
Optional internal upgrades allow for the support of up 12 x V.90 modem calls and a 4, 8, 16, 24 or 30-
channel Voice used for either providing networking between sites over a Wide Area Network or supporting
Compression Module (VCM). The VCM module supports 4, 8, 16, 24 or 30 simultaneous Voice over IP
sessions.
These can be IP Telephones and Soft phones. Typically an IP extension only uses a compression module
channel when starting a call and while on a call to a non-IP extension/line. It is possible to configure more IP
extensions than the capacity of the installed VCM.
Through support of up to six external Expansion Modules, IP406 V2 can be enhanced to support a mixture
of analog, digital or IP phones to maximum of 190 phones.
Voice mail capability:
Five voicemail modes of operation are available:
Voicemail Lite
Voicemail Pro
Embedded Voicemail with Auto Attendant
Voicemail Pro Networked Messaging with other voicemail systems
Centralized Intuity Audix / Modular Messaging Voicemail
Hardware Compatibilities:
Internal Modules
IP400 Office Quad BRI.
IP400 Office PRI T1.
IP400 Office Dual PRI T1
IP400 Office Universal Quad Loop start Analog Trunk with caller ID .
IP400 Office VC Module – 4/8/16/24/30
IP400 Internal Modem Card
3