Gardena Comfort 5000/5 Посібник оператора - Сторінка 4

Друкувати сторінку

Gardena Comfort 5000/5 Посібник оператора

Extension cables

Date indicated on the type plate must match technical

data of the mains supply.

Only use extension cables authorised in accordance with

HD 516.

v Consult your qualified electrician.

v Don't use the power cable for carrying the pump or for

plugging off.

In Austria

In Austria, the electrical connections must be made

according to ÖVE-EM 42, T2 (2000) / 1979 § 22 based

on § 2022. Pursuant to this regulation it's imperative to

operate pumps for swimming pools and garden ponds

exclusively via an isolating transformer.

v Please ask your electrician.

In Switzerland

In Switzerland mobile appliances which are used out-

doors, must be connected via a residual- current device.

Visual check

v Before operating the pump, first make a visual cheek,

if there is any damage of the pump (esp. regarding

power cable and plug).

A damaged pump must not be used.

v In case of damage, please have the pump checked

by our GARDENA Service Centre or by an authorised

electrician.

v If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

2. INITIAL OPERATION

Setting up your Garden Pump:

The site must be firm and solid in order to ensure safe and

sturdy operating conditions for the pump.

v Position the pump at a safe distance (min. 2 m) from the

liquid to be pumped.

The pump must be installed in a location with low air

humidity and sufficient ventilation in the area of the ven-

tilation slots. It must be at a distance of at least 5 cm

from the walls. No dirtcontamination (e.g. sand or earth)

may be sucked in through theventilation slots.

Connecting hose to suction side [ Fig. I1 ]:

Don't use any hose connection system fittings on the

suction side! A vacuum-resistant suction hose must be

used, e. g. GARDENA Suction Unit, Art. 1411.

In order to reduce the suction time, it is advisable to use

a suction hose with backflow preventer avoiding automatic

draining of the suction hose when the pump is stopped.

1. Screw a vacuum-resistant suction hose

the connector on the suction side of the pump

2. For suction heights exceeding 4 m also secure the

suction hose

(e.g. by fastening it to a wooden post).

Note

v Protect the pump from rain. Don't use the pump in wet

or moist area.

In order to avoid dry-running of the pump, take care that

the end of the suction hose is always submerged into the

liquid.

v Before each operation, fill the pump to overflowing with

approx. 2 to 3 l of the liquid to be pumped!

Sand and other abrasive substances in the liquid cause

in-creased wear and reduce the pump's output.

Pumping dirty water, e.g. stones, pine needles etc., can

cause damage to the pump.

v Do not pump dirty water.

The minimum flow rate is:

4000/5: 90 l/h (= 1.5 l/min);

5000/5: 200 l/h (= 3.3 l/min).

Watering accessories with lower rate must not be

operated.

DANGER! This product makes an electromagnetic field

while it operates. This field may under some conditions

interfere with active or passive medical implants. To

decrease the risk of conditions that can possibly injure or

kill, we recommend persons with medical implants to

speak with their physician and the medical implant manu-

facturer before you operate the product.

DANGER! Small parts can be easily swallowed. There

is also a risk that the polybag can suffocate toddlers.

Keep toddlers away when you assemble the product.

This relieves the pump of the weight of the suction

hose.

Connecting hose to delivery side [ Fig. I2 ]:

The pumps have 2 connections

The pump connection not in use has to be closed by the

cap

, which can be unscrewed for connecting 2 hoses.

The pump connections

(G 1") thread which can be used to connect 13 mm (1/2"),

16 mm (5/8") or 19 mm (3/4") hoses via the GARDENA

hose connection system.

Optimised use of the pump capacity is achieved by con-

necting 19 mm (3/4") hoses with e.g. GARDENA Pump

Connection Set Art. 1752, or by connecting 25 mm (1")

hoses with GARDENA Quick Thread Coupling with

female thread Art. 7109 / Quick Coupling Hose

Connector Art. 7103.

v Connect the pressure hose

delivery side

If more than 2 hoses / accessories are connected simul-

taneously, we recommend using the GARDENA 2

airtight onto

or 4Channel Water Distributor Art. 8193 / 8194,

GARDENA TwinTap Connector Art. 940 which can

be screwed directly onto the connection on the delivery

side

are equipped with a 33.3 mm

to the connector on the

on the delivery side.