**Preventing others from bridging onto your call requires the Exclusion feature. The feature ensures call privacy and
can only be activated during an active call. The feature must be enabled/programmed for your extension by the
System Administrator. When you activate Exclusion during a call, all parties except you and the calling or called party
are dropped from the call.
CALL FORWARD:
You can forward/redirect all your incoming calls to another number or voicemail. If call forwarding is activated, a
forwarding icon appears on the top line of your display screen and the Forward button is illuminated. You must enter the
telephone number where the calls are forwarded each time you enable the feature.
1. If the CFW feature is not on the front screen, go to the Main Menu and gain access to the Features screen.
Activate Call Forwarding:
2. Scroll to choose CFW (Call Forward).
3. Press Select or press the associated line button.
4. Enter the extension number to which you want to forward your calls.
5. Press Enter.
Use this task to turn off any call forwarding feature that you activated.
Disabling Call Forwarding:
1. Press the right navigation button to gain access to the Features screen.
2. Select the active call forwarding feature that you want to turn off.
3. Press OK or the line button on which the call forwarding feature appears.
TEAM BUTTON:
This feature allows you to view/monitor other extensions at a glance. If your job requires that you cover or monitor
phones for others, your system administrator may set up "Team Buttons" so that you can see whether an extension you
cover is idle or busy at a glance. Extensions that you monitor with Team Buttons will show LED green when the extension
is active. You also have the ability to answer any calls that are ringing to the monitored phone. You make a speed dial
call to the monitored phone by press the Team button when the monitored phone does not have an active call. You can
1. If the button is not on the front screen, from the Phone screen, gain access to the Main Menu.
transfer an active call to the monitored phone by pressing the Team Button during the transfer process.
2. Access the Features screen.
3. If that extension is in use, the LED beside the extension will show Red. If the extension is not in use, the LED
will show Green.
4. To call a monitored extension, scroll to the applicable line and press the line or OK button associated with that
extension.
DND (Do Not Disturb):
When DND is on or activated, your incoming calls go directly to a predefined coverage number, typically your voicemail.
1. Press the DND button turns the feature on and changes the
Incoming calls ring once at your extension and then go directly to a number which is set by your system administrator.
feature is on.
2. Pressing DND turns the feature off and the light goes back to Red.
APPLICATIONS:
CONTACTS:
**NOTE: You can save up to 250 names and up to 6 telephone numbers per contact. When you press the Contacts button,
the phone activates the Contacts search mode automatically.
J169/J179 SIP Telephone
End User Reference Guide
light beside the key to
Red
7
to indicate the
Green
Друкувати сторінку