Broadata 4802 Series Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Передавач Broadata 4802 Series. Broadata 4802 Series 14 сторінок. Fiber optic dvi extension system

Друкувати сторінку

3.0 INSTALLATION

Important: Please use the installation procedure below. Improper,

or no operation may result if the start-up sequence is not correctly

followed.

1. Plug the 5V power adapter into the power jack of the transmitter,

and connect the adapter to the main electricity. Then ensure

that the blue LED light is ON.

2. For Auto EDID programming:

Push the Audio EDID button with a narrow pin. After

the Blue LED blinks twice, it will be turned off.

Connect the power transmitter to display while turned

on, not to the PC. The blinking LED indicates reading

the EDID. The LED will turn OFF after blinking, indicating

that the programming is done.

Disconnect the transmitter from the display. The EDID is

now stored.

Note: If you want to change the display, please do Step 2 again.

The default EDID in factory is programmed in the VESA

standard of UXGA 60Hz.

3. Plug the transmitter module directly into the DVI receptacle of

the PC and confirm if the blue LED is ON. Or, connect the 5V

power adapter into the power jack of the transmitter.

Broadata Technical Support, [email protected]

BCI 4800/4802 User's Manual

Fiber Optic DVI Extension System

Figure 3-1

Auto EDID button.