Broadata LBC-SPH4-1H3B-EIR Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Мережеве обладнання Broadata LBC-SPH4-1H3B-EIR. Broadata LBC-SPH4-1H3B-EIR 18 сторінок. Link bridge hdbaset 3x transmission system

Друкувати сторінку

2.0 OPERATION CONTROLS AND FUNCTIONS

2.1 Front Panel

1. HDMI IN:

Connect to HDMI equipped source equipment such as a DVD/

Blu-ray player or game console.

2. SYNC LED:

This LED will illuminate when the HDMI input is connected to a

HDMI source and receiving a signal.

3. HDMI OUT:

Connect to a HDMI display for local monitoring of the HDMI

signal or cascade to another Splitter.

4. HDMI LINK LED:

This LED will illuminate when HDMI output is connected to TV

or display monitor and receiving a signal.

5. EDID STD/TV:

The default setting is TV, when in this mode, the unit will detect

the EDID settings of the display device connected to the CAT

5e/6/7 Output 1. If it detects a 4K×2K capable EDID setting it

will transmit the signal in that format to the output port. If no

4K×2K capable EDID is detected then the unit will detect the

EDID settings and send out the signal that all outputs can accept.

This device has a last memory function and will retain the EDID

settings of the last device connected via the CAT5e/6/7 output

port when it is not connected to a display after power cycling.

Switch to the STD setting to use the unit's built-in EDID if there

are display problems. In this mode, the video output will be set

to 1080p@60Hz and the audio at LPCM 2CH Stereo..

Broadata Technical Support, [email protected]

LBC-SPH4-1HB3-EIR User's Manual

Link Bridge

HDBaseT 3x Transmission System