Gardena ComfortCut8895 Інструкція з експлуатації Посібник з експлуатації - Сторінка 7
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Тример Gardena ComfortCut8895. Gardena ComfortCut8895 15 сторінок. Accu shears
Друкувати сторінку
ß
7a
q
Change Shears Set of
Blades:
w
e
6. Putting into Storage
Storage / Overwintering:
Disposal:
(in accordance with
RL 2012/19/EU)
Cutting with the Telescopic Swivel Handle:
1. Attach the Telescopic Swivel Handle.
2. Loosen the adjusting bolt
3. Set the handle to the correct length and tighten the adjusting
ß
8a
bolt
.
q
4. Disengage the starting lockout
press the ON button
5. Release the starting lockout
Please only use original GARDENA Accu Shears Cutting
Blades.
• Grass+Boxwood-Blade Set cutting width 8 cm
• Shrub-Blade Set
• Shrub Blade Set
1. Press both lock buttons
blade set
2. If necessary clean transmission chamber and lubricate gear
t
wheels with some acid-free grease (Vaseline).
3. Place the shear blade set
the groove
audibly engaged.
4. If necessary, spray the shear blades with Cleaning Spray
r
Art. 2366. This increases the running time.
When first switching on after changing the blade set, there can be
an audible click when the cam engages with the the shear blade
connecting link.
Store your Accu Shears out of the reach of children.
1. Charge battery. This increases the life of the battery.
2. Clean Accu Shears and shear blade with GARDENA Cleaning
Spray Art. 2366 (see 7. Maintenance).
3. Slide blade protection onto the shear blade.
4. Store Shears in a cool, dry place where they are protected from
frost.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
.
q
ß
7a
.
ß
8a
again.
ß
7a
cutting length 12.5 cm Art. 2342
cutting length 18 cm
at the same time, flip up shear
w
and remove.
e
with the snap-in lug
e
and snap shut until both lock buttons
t
by pushing it forwards and
Art. 2340
Art. 2343
into
r
have
w
17