®
PARTNER
Advanced Communications System Installation, Programming, and Use
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient the receiving television or radio antenna where this may be done safely.
I
To the extent possible, relocate the receiver with respect to the telephone equipment.
I
Where the telephone equipment requires AC power, plug the telephone into a different AC
I
outlet so that the telephone equipment and receiver are on different branch circuits.
Federal Communications Commission Statement
Part 15: Personal Computer Statement. This equipment has been certified to comply with the
limits for a Class B computing device, pursuant to Subpart J of Part 15 of FCC Rules. Only
peripherals (computing input/output devices, terminals, printers, etc.) certified to comply with the
Class B limits may be attached to this computer. Operation with noncertified peripherals is likely to
result in interference to radio and television reception.
Part 68: Network Registration Number. This equipment is registered with the FCC in
accordance with Part 68 of the FCC Rules. The FCC Part 68 registration numbers are printed on
the label located on the side of the control unit.
Part 68: Answer-Supervision Signaling. Allowing this equipment to be operated in a manner
that does not provide proper answer-supervision signaling is in violation of Part 68 Rules. This
equipment returns answer-supervision signals to the public switched network when:
Answered by the called station
I
Answered by the attendant
I
FCC Notification and Repair Information
This equipment is registered with the FCC in accordance with Part 68 of its rules. In compliance
with those rules, you are advised of the following:
Means of Connection: Connection to the telephone network shall be through a standard network
interface jack USOC RJ11C. These USOCs must be ordered from your local telephone company.
FCC compliant line cords are provided with Line and Line/Extension Modules for connecting to the
telephone company provided USOC RJ11C jacks. Use only FCC compliant line cords and jacks
for these connections.
This equipment may not be used with party lines or coin telephone lines.
A. Customer Support
8
Друкувати сторінку