Gardena EasyCut 400 Інструкція з експлуатації Посібник з експлуатації - Сторінка 4

Друкувати сторінку

Gardena EasyCut 400 Інструкція з експлуатації Посібник з експлуатації

3. Assembly

Assembling the trimmer :

Fit additional wheel :

4. Operation

RISK OF INJURY !

Connecting the trimmer :

1. Push the cover

behind

2. Push plant guard

until it locks into place.

The additional wheel is available as an optional extra for the

EasyCut 400 / 480. The additional wheel is already fitted on the

ComfortCut 450 / PowerCut 500.

Fit additional wheel :

v Fit additional wheel

guides of the handle holder

until you hear the connection

lock into place on both sides.

Remove additional wheel :

v Pull both catches

side and remove the additional

wheel

from the guides of the

handle holder

Fold additional wheel up / down :

v Press adjusting buttons

sides, fold additional wheel up / down

and release the adjustment buttons

Risk of injury if the Turbotrimmer does not switch off when

you release the start button.

V Never bypass the safety devices or switches (e.g. by

tying the safety lock to the handle).

1. Insert the loop of the extension cable

relief

from below through the upper part of the handle

and pull tight.

2. Plug the plug

extension cable

3. Plug the extension cable into a 230 V mains power supply.

into the guide of the cutting head from

until the connection locks into place on both sides.

onto the cutting head from the front

onto the

out to the

on both

of the trimmer into the socket

again.

into the cable strain

of the